thermaltake case parts

EL-Snake
1. 4 step flashing sequence
2. “Super Bright” EL Badge!!
3. Flexible badge material to fit flat and curved surfaces
4. Removable sucking discs allowing the EL badge to be installed either on the inside or outside of the computer case.
5. No heat generated
Specification:

Inverter Specification:

Load: 40mA~80mA.
Input Voltage: 12VDC.
Output Voltage: 60VAC~100VAC.
Output Frequency: 0.45KHz ~0.85KHz.
Dimensions: 81 x 38 x 32 mm.
Power Connector: PC Power Connector.
EL Connector: One output protector connector.
Lifetime: Over 3 years in normal operating condition.
Operating Conditions Temperature: -40?~70?.
Humidity: <90%RH.
Storage Conditions Operating Conditions: -40?~70?.
Humidity: <70%RH.

EL Specification:

Dimensions: 15.0*15.0cm.
Flash Way: Flash.
Material: ITO/Phosphor/Black Ink/PIN/Ruminating Film.
Initial Brightness: 25cd/?±10cd/?.
Operating Conditions Temperature: -40?~70?.
Humidity: <90%RH.
Storage Conditions Operating Conditions: -40?~70?.
Humidity: <70%RH.

CHECK PRICE NOW!
Read Full Review >>

Get started on building your own computer with this MicroATX tower computer case. Front USB: 2 x USB2.0. Lock: Yes. Power Supply: AGI-U350HH. Side Air Duct: Yes. Type: Micro ATX. Dimensions: 7.09″ W x 17.7″ D x 13.78″ H. Motherboard Compatibility:

CHECK PRICE NOW!
Read Full Review >>

EL-Dragon
1. 5 step flashing sequence
2. “Super Bright” EL Badge!!
3. Flexible badge material to fit flat and curved surfaces
4. Removable sucking discs allowing the EL badge to be installed either on the inside or outside of the computer case.
5. No heat generate

Specification:

Inverter Specification:

Load: 40mA~80mA.
Input Voltage: 12VDC.
Output Voltage: 60VAC~100VAC.
Output Frequency: 0.45KHz ~0.85KHz.
Dimensions: 81 x 38 x 32 mm.
Power Connector: PC Power Connector.
EL Connector: One output protector connector.
Lifetime: Over 3 years in normal operating condition.
Operating Conditions Temperature: -40?~70?.
Humidity: <90%RH.
Storage Conditions Operating Conditions: -40?~70?.
Humidity: <70%RH.

EL Specification:

Dimensions: 15.0*15.0cm.
Flash Way: Flash.
Material: ITO/Phosphor/Black Ink/PIN/Ruminating Film.
Initial Brightness: 25cd/?±10cd/?.
Operating Conditions Temperature: -40?~70?.
Humidity: <90%RH.
Storage Conditions Operating Conditions: -40?~70?.
Humidity: <70%RH.

CHECK PRICE NOW!
Read Full Review >>

The need for a compact yet powerful PC has inspired Thermaltake to engineer this unprecedented mobile gaming powerhouse, LANBOX Lite Unlike tower chassis, small form factor PC often lacks sufficient cooling capability or expandability to allow enthusiasts to build a capable gaming machine. Designed from the ground up, LANBOX Lite is a fully modular chassis where all component may be removed from the body for easier installation. Everything from Motherboard Tray to 5.25″ Bay Drive cage can be easily removed with a twist of the thumb screws. Before, gaming enthusiasts that opted to build a small form factor PC were limited to mid-end graphic card or processor that resulted in mediocre performance.

CHECK PRICE NOW!
Read Full Review >>

This case has a sleek black finish and an included multi-color LED fan for a unique look to your computer system. Transparent black acryl and black interior for the most stylish look. Front panel vents on both sides and bottom for enhanced airflow. Fro

CHECK PRICE NOW!
Read Full Review >>

Build a Home Theater PC with this lay flat MicroATX computer case. With its black and silver design, this case matches the sleek black design of many home theater systems. Motherboard Compatibility: Micro ATX. Chassis Color – Body: Black. Chassis Colo

CHECK PRICE NOW!
Read Full Review >>

Easily convert your unused 5.25-Inch drive bays into a hard drive cooling area! Quickly and easily converts 3 drive bays to accept 4 hard drives and comes with a 120mm quiet fan to cool your hard drives. Quick and easy installation and is very stylish as well!

CHECK PRICE NOW!
Read Full Review >>